TM 5-3805-254-34
6-38.
LOW PLANETARY CARRIER REPAIR (Con’t).
4.
While supporting pinion pin (3) on 0.81 in. (20.57 mm) diameter anvil, swage each end of pinion pin, in eight
places, using suitable punch. After swaging, pinion gear (6) must freely rotate.
5.
Measure end play of pinion gear (6) on pinion pin (3). End play must be 0.008-0.031 in. (0.203-0.787 mm).
6.
Repeat steps 3 through 5 for three remaining pinion gears (6).
7.
Press ball bearing (1) on low planetary carrier (2).
FOLLOW-ON TASKS:
• Install low planetary carrier (see paragraph 6-20).
TA703896
6-181
