TM 5-3805-254-34
6-37.
OUTPUT HOUSING REPAIR (Con’t).
6.
Press speedometer drive gear (7), spacer (6),
and ball bearing (5) on rear of output shaft (2).
7.
Turn output housing (3) with large flange facing
downward.
NOTE
If retaining ring Is bevelled, Install bevel
toward rear of transmission.
8.
Install retaining ring (4) into second groove of
output housing (3).
9.
Install output shaft (2) and snapring (1).
FOLLOW-ON TASKS:
• Install governor assembly (see paragraph 6-35).
• Install transmission output shaft oil seal (see paragraph 6-36).
• Install output housing (see paragraph 6-19).
TA703893
6-178
