TM 5-3805-254-34
6-37.
OUTPUT HOUSING REPAIR (Con’t).
3.
Support front surface of speedometer drive gear
(7).
4.
Press output shaft (2) downward to remove
speedometer drive gear (7), spacer (6), and ball
bearing (5).
5.
Turn output housing (3) with large flange facing upward.
6.
Using bar and stud and spring compressor, compress clutch retainer (9) just enough to remove snapring (8).
Remove bar and stud and spring compressor.
7.
Remove clutch retainer (9) and 30 springs (10) from clutch piston (11).
8.
Remove clutch piston (11) from output housing (3).
9.
Remove two seals (12 and 13) from clutch piston (11). Discard seals.
TA703889
6-174
