TM 5-3805-254-34
6-37.
OUTPUT HOUSING REPAIR (Con’t).
b.
CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles and gloves, and
use only In a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO NOT breathe
vapors. DO NOT use near open flame or excessive heat. The solvent's flash point Is 100°F-138°F (38°C-
590C). If you become dizzy while using cleaning solvent, immediately get fresh air and medical help. If
solvent contacts eyes, Immediately wash your eyes and get medical aid.
1.
Clean metal parts with dry cleaning solvent.
2.
Inspect metal parts for cracks, breaks, wear, or other damage. Replace if damaged.
3.
Inspect for broken or deformed springs. Springs must meet these requirements:
(a) Length without load :............................................. 1.25 in. (3.18 cm).
(b) Length with load of 17.9-18.9 lb (79.6-84 N):................ 0.88 in. (22.35 mm).
TA703890
6-175
