TM 5-3805-264-13&P
0066
ASSEMBLY - Continued
NOTE
Perform Steps 14 through 19 to install plunger.
14.
Install two piston rings (Figure 27, Item 3), piston ring (Figure 27, Item 2), and new wear ring
(Figure 27, Item 1) on plunger (Figure 27, Item 4).
Figure 27. Piston Ring and Wear Ring Installation.
15.
Install plunger (Figure 28, Item 2) in sleeve (Figure 28, Item 3) and install bottom retaining ring
(Figure 28, Item 1) in sleeve using 3-inch seal installation tool.
Figure 28. Plunger Installation.
03/15/2011Rel(1.10)root(maintwp)wpno(M1005126413)