TM 5-3805-264-13&P
0066
ASSEMBLY - Continued
NOTE
Perform Steps 8 through 13 to install next sleeve.
8.
Install two piston rings (Figure 24, Item 3), piston ring (Figure 24, Item 2), and new wear ring
(Figure 24, Item 1) on sleeve (Figure 24, Item 4).
Figure 24. Wear Ring and Piston Ring Installation.
9.
Install sleeve (Figure 25, Item 1) in sleeve (Figure 25, Item 3) and install bottom retaining ring
(Figure 25, Item 2) in sleeve (Figure 25, Item 3) using 4-inch seal installation tool.
Figure 25. Bottom Retaining Ring Installation.
03/15/2011Rel(1.10)root(maintwp)wpno(M1005126413)
