TM 5-3805-264-13&P
0066
DISASSEMBLY - Continued
24.
Using two small screwdrivers, remove bottom retaining ring (Figure 17, Item 3) from groove of barrel
(Figure 17, Item 2). Position four hydraulic cylinder disassembly tools, equally spaced, between bottom
retaining ring and barrel.
NOTE
Hydraulic cylinder disassembly tools will fall free as sleeve, with bottom retaining ring, is
removed from barrel.
25.
Remove sleeve (Figure 17, Item 1) from barrel (Figure 17, Item 2). Remove bottom retaining ring
(Figure 17, Item 3) from sleeve.
Figure 17. Sleeve Removal From Barrel.
26.
Remove wear ring (Figure 18, Item 1) and two piston rings (Figure 18, Item 2) from other end of sleeve
(Figure 18, Item 3). Discard wear ring.
Figure 18. Wear Ring and Piston Ring Removal.
03/15/2011Rel(1.10)root(maintwp)wpno(M1005126413)