TM 5-3805-264-13&P
0066
DISASSEMBLY - Continued
27.
If worn or damaged, remove two bushings (Figure 19, Item 4) from barrel (Figure 19, Item 1) and bushing
(Figure 19, Item 3) from plunger (Figure 19, Item 2).
Figure 19. Bushing Removal.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect components in accordance with General Maintenance Instructions (WP 0072).
END OF TASK
ASSEMBLY
WARNING
Use extreme care when handling heavy parts. Lifting cables, chains, hooks, and
slings must be in good condition and of suitable capacity. Keep clear of parts
supported only by lifting device.
Hydraulic cylinder sleeves may extend downward as hydraulic cylinder is lifted.
Expect sleeve movement any time hydraulic cylinder is handled.
Failure to comply may result in personnel injury, death, and/or damage to
equipment.
03/15/2011Rel(1.10)root(maintwp)wpno(M1005126413)
