TM 5-3805-264-14&P
4-71.
HYDRAULIC CONTROL LEVER CABLE REPLACEMENT (Con't).
18.
19.
Remove four screws (37) and shift tower (1)
from cab floor.
Remove transmission tunnel access cover (TM
9-2320-363-20).
20.
21.
At hydraulic pump, turn jam nut (38) over entire length of threads on cable (36)
Remove two screws (40), flatwashers (42), and lockwashers (41) from flange clamp (43). Discard lock-
washers.
22.
Slide flange clamp (43) away from bonnet (39)
23.
Unscrew bonnet (39) and slide spacer (44) along cable (36) until cable bracket (46) can be accessed.
24.
Remove cotter pin (47) and clevis pin (45) from hydraulic pump actuator (48). Discard cotter pin.
4-127
