TM 5-3805-264-14&P
4-71.
HYDRAULIC CONTROL LEVER CABLE REPLACEMENT (Con't).
16.
With transfer case selector lever in N (Neutral) position, install pivot pin (18) in bracket (26) and secure
with retaining pin (17). Remove tag from cable (25).
17.
Install spacer (20). cable (25) clamp (21), two screws (19), new lockwashers (22), and nuts (23) to bracket
(24).
18.
19.
20.
21.
22.
With transmission selector lever in D (Down) position. install pivot pin (5) in bracket (16) and secure with
retaining pin (4). Remove tag from cable (15).
Install spacer (7), cable (15). clamp (8). two screws (6), new lockwashers (9), and nuts (10) to bracket (14).
Place transmission selector lever in N (Neutral) position (TM 9-2320-363-10).
Feed cab harness power and ground connectors (12) into shift tower (1) and install grommet (11).
Connect shift tower jumper harness power and ground connectors (13) to cab harness power and ground
connectors (12). Remove tags.
4-130
