TM 5-3805-264-14&P
4-75.
HYDRAULIC OIL FILTER ELEMENT REPLACEMENT (Con’t).
Ports in reservoir should be plugged to prevent contamination of hydraulic system
(paragraph 4-21).
1.
Loosen four screws (1), rotate filter housing cover (5), and lift cover from filter housing (2).
2.
Remove oil filter element (3) and discard.
3.
Remove preformed packing (4) from groove in filter housing cover (5). Discard preformed packing.
tions.
Clean and inspect components in accordance with Chapter 4, Section III, General Maintenance Instruc-
1.
2.
3.
Coat new preformed packing (4) with lubricat-
ing oil and install in groove of filter housing
cover (5).
Install new oil filter element (3) to filter housing
(2).
Install filter housing cover (5) to filter housing
(2) with four screws (1).
FOLLOW-ON TASKS:
Remove body props and lower dump body (paragraph 2-15).
Fill hydraulic reservoir as necessary (Chapter 3, Section I).
4-142
