TM 5-3805-264-14&P
4-76.
HYDRAULIC OIL FILTER SERVICE INDICATOR GAGE REPLACEMENT.
This task covers.
a. Removal
b. Cleaning and Inspection
c. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts (Con’t):
Dump body raised and supported on body props
(paragraph 2-15).
Antiseize tape (Item 20, Appendix F)
Tools/Test Equipment:
General Safety Instructions:
General mechanic’s tool kit (Item 8, Appendix I)
Cap and plug set (Item 1, Appendix I)
Materials/Parts:
Rags (Item 15, Appendix F)
NEVER work under a raised dump body unless it
is secured in the raised position with body props
and dump body is EMPTY.
DO NOT disconnect hydraulic lines while engine
is running.
NEVER work under a raised dump body unless it is secured in the raised posi-
tion with body props and dump body is EMPTY. Failure to follow this warning
may result in death or injury to personnel.
DO NOT disconnect hydraulic lines while engine is running. Engine must be
shut down and dump body fully lowered or supported on body props before
lines are disconnected. Escaping hydraulic fluid under pressure can penetrate
the skin, causing serious injury to personnel.
Ports in reservoir should be plugged to pre-
vent contamination of hydraulic system
(paragraph 4-21).
1.
Remove gage (1) from elbow (2).
2.
Remove elbow (2) and nipple (3) from filter
housing cover (4).
4-143
