TM 5-3805-264-14&P
4-74.
HYDRAULIC RESERVOIR REPAIR.
This task covers.
a. Disassembly
c. Assembly
b. Cleaning and Inspection
lnitial Setup:
Tools/Test Equipment:
General mechanic’s tool kit (Item 8, Appendix I)
Cap and plug set (Item 1, Appendix I)
Materials/Parts:
Lubricating oil (Item 12 or 13, Appendix F)
Materials/Parts (Con’t):
Rags (Item 15, Appendix F)
Antiseize tape (Item 20, Appendix F)
One preformed packing
One seal
Ports in reservoir should be plugged to pre-
vent contamination of hydraulic system
(paragraph 4-21).
1.
Remove hydraulic oil filter service indicator
gage (paragraph 4-76).
2.
Remove hydraulic oil filter element (paragraph
4-75).
3.
Remove four screws (1) and filter housing (10)
from hydraulic reservoir (8).
4.
Remove pipe (9) from filter housing (10)
5.
Remove seal (1 1) from filter housing mounting
flange. Discard seal.
6.
Separate filter housing (10) and remove pre-
formed packing (12). Discard preformed pack-
ing.
7.
Remove fill cap (3), six screws (2), and strainer
(4).
8.
Remove sight tube (6) and two elbows (5)
9.
Remove drain plug (7).
Clean and inspect components in accor-
dance with Chapter 4, Section III, General Mainte-
nance Instructions.
4-139
