TM 5-3805-264-14&P
4-75.
HYDRAULIC OIL FILTER ELEMENT REPLACEMENT.
This task covers:
a. Removal
b. Cleaning and Inspection
c. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts (Con't):
Dump body raised and supported on body props
(paragraph 2-15).
One oil filter element
One preformed packing
Tools/Test Equipment:
General mechanic’s tool kit (Item 8, Appendix I)
Cap and plug set (Item 1, Appendix I)
Materials/Parts:
General Safety Instructions:
NEVER work under a raised dump body unless it
is secured in the raised position with body props
and dump body is EMPTY.
Lubricating oil (Item 12 or 13, Appendix F)
Rags (Item 15, Appendix F)
DO NOT disconnect hydraulic lines while engine
is running.
NEVER work under a raised dump body unless It Is secured in the raised posi-
tion with body props and dump body is EMPTY. Failure to follow this warning
may result In death or injury to personnel.
DO NOT disconnect hydraulic lines while engine Is running. Engine must be
shut down and dump body fully lowered or supported on body props before
lines are disconnected. Escaping hydraulic fluid under pressure can penetrate
the skin, causing serious Injury to personnel.
4-141
