TRUCK SERVICE MANUAL
STEERING
23. Remove remaining reversing spring from the
piston.
24. Remove piston rings from piston.
Fig. 24
21. Pull actuating valve from the piston. Do not force
Fig. 26
valve from the piston assembly, Fig. 24.
25. Remove valve seats using a 3/16" Allen wrench,
22. Remove valve positioning pin from the piston
Fig. 26. NOTE: Do not lose relief valve balls,
using a screwdriver, Fig. 25.
which are spring loaded. The relief valve spring
can then be removed.
26. Remove seal (quad ring) from output shaft bore,
Fig. 27.
27. If bushings in the housing or cover need
replacing, they may be removed using a puller.
Fig. 27
Fig. 25
641