TM 5-3805-254-20-1
ACCELERATOR CONTROL PIVOT ARM - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE:
1.
Install air cleaner element (page 2-452).
2.
Connect battery cables (page 2-424).
3.
Close right and left side hood panels (page 2-424).
4.
Install engine cover (page 2-1270).
5.
Close left side cab door (page 2-424).
TASK ENDS HERE
ACCELERATOR CONTROL PEDAL
This task covers:
a.
Removal (page 2-575)
d.
Installation (page 2-577)
b.
Cleaning (page 2-576)
e.
Adjustment (page 2-578)
c.
Inspection (page 2-576)
INITIAL SETUP:
Tools
Personnel Required
Gloves, safety
Two
Goggles, safety
Gun, blow, air
Equipment Condition
Hose, air, assembly
Pliers, diagonal-cutting, 6-inch
Battery cables disconnected (page 2-424).
Pliers, slip-joint, 6-inch
Left side cab door opened (page 2-424).
Screwdriver, cross-tip, number three
Left side hood panel opened (page 2-424).
Wrench, open-end, 1/2-inch
References
Materials/Parts
TM 9-247 (Authorized Cleaning Methods)
Cotter pin, pedal bracket
Solvent, drycleaning (item 19,
appendix C)
2-574
