TM 5-3805-254-20-1
ACCELERATOR CONTROL PEDAL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
For more information on cotter pins, go to General Maintenance Instructions (page 2-424).
1.
Pedal bracket (1)
Cotter pin (2) and
a.
Using 6-inch diagonal-cutting pliers,
flat washer (3)
close ends of cotter pin and pull out.
b.
Take off flat washer.
c.
Get rid of cotter pin.
2.
Clevis pin (4) and
a.
Using 6-inch slip-joint pliers, pull out
control pedal (5)
clevis pin.
b.
Take out control pedal.
3.
Two screws (6)
a.
Using number three cross-tip screwdriv-
er, unscrew and take out.
b.
Take out pedal bracket.
4.
Floor panel (7)
Bolt (8) and
a.
Using 1/2-inch open-end wrench,
locknut (9)
loosen locknut.
b.
Unscrew and take out bolt.
TA244075
2-575
