TM 5-3805-254-20-1
ACTION
LOCATION
ITEM
REMARKS
NOTE
FOLLOW-ON MAINTENANCE:
1.
Connect battery cables (page 2-424).
2.
Close left side hood panel (page 2-424).
3.
Close left side cab door (page 2-424).
TASK ENDS HERE
HAND THROTTLE CONTROL
This task covers:
a.
Removal (page 2-581)
c.
Inspection (page 2-584)
b.
Cleaning (page 2-584)
d.
Installation (page 2-586)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Gloves, safety
Lockwasher, hand throttle cable
Goggles, safety
Solvent, drycleaning (item 19, appendix C) ’--
Gun, blow, air
Handle, ratchet, 1/2-inch drive
Personnel Required
Hose, air, assembly
Pliers, diagonal-cutting, 6-inch
One
Screwdriver, flat-tip, 3/16-inch
Socket, 7/16-inch, 1/2-inch drive
Equipment Condition
Wrench, box-end, 7/16-inch
Wrench, open-end, 9/16-inch
Right and left side hood panels opened
(page 2-424).
Materials/Parts
Left side cab door opened (page 2-424).
Air cleaner element removed (page 2-452).
Cotter pin, swivel
Engine cover removed (page 2-1270).
Grommet, hand throttle cable
Battery cables disconnected (page 2-424).
Lockwasher, clamp
Lockwasher, hand throttle bar
References
(two required)
TM 9-247 (Authorized Cleaning Methods)
2-580
