TM 5-3805-254-20-1
HAND THROTTLE CONTROL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
For more information on cotter pins, go to General Maintenance Instructions (page 2-424).
1.
Swivel (1)
Cotter pin (2)
a.
Using 6-inch diagonal-cutting pliers,
and flat washer (3)
close ends of cotter pin and pull out.
b.
Take off flat washer.
c.
Get rid of cotter pin.
2.
Lever assembly (4)
Swivel (1)
Pull out.
3.
Throttle stop (5)
Screw (6)
Using 3/16-inch flat-tip screwdriver,
loosen.
4.
Hand throttle
Swivel (1) and
Pull off.
cable (7)
throttle stop (5)
5.
Clamp (8)
Nut (9), lockwasher
a.
Using 7/16-inch, 1/12-inch drive
(10), and screw (11)
socket, ratchet handle, and 7/16-inch
box-end wrench, unscrew and take off.
b.
Get rid of lockwasher.
6.
Hand throttle
Clamp (8)
a.
Using 3/16-inch flat-tip screwdriver,
cable (7)
open clamp.
b.
Take off clamp.
TA244078
2-581
