TM 5-3805-254-20-1
HAND THROTTLE CONTROL - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
7.
Firewall (1)
Hand throttle bar
a.
Using 7/16-inch, 1/2-inch drive socket
(2), two nuts (3),
ratchet handle, and 7/16-inch box-end
two lockwashers (4),
wrench, unscrew and take off.
and two screws (5)
b.
Get rid of lockwashers.
8.
Dashboard (6)
Hand throttle cable
a.
Using 9/16-inch open-end wrench,
(7), nut (8), and
loosen nut.
lockwasher (9)
b.
Unscrew nut to end of threads.
CAUTION
Use care when pulling out hand throttle cable as damage to wiring could occur.
9.
Hand throttle cable
a.
Hold nut and lockwasher.
(7), nut (8), and
b.
Pull out hand throttle cable.
lockwasher (9)
c.
Get rid of lockwasher.
TA244079
2-582
