TM 5-3805-254-20-2
CAB FLOOR THROUGH CONNECTOR TO DOUBLE CHECK VALVE HOSE - CONTINUED
INITIAL SETUP:
Tools
Materials/Parts - Continued
Gloves, safety
Rags, wiping (item 15, appendix C)
Goggles, safety
Solvent, drycleaning (item 19, appendix C)
Screwdriver, cross-tip, number two
Tape, antiseizing (item 22, appendix C)
Wrench, box-end, 7/16-inch
Wrench, open-end, 7/16-inch
Personnel Required
Wrench, open-end, 1/2-inch
Wrench, open-end, 9116-inch
Two
Wrench, open-end, 5/8-inch
Wrench, open-end, 3/4-inch
Equipment Condition
Wrench, open-end, 1-inch
Wrench, open-end, 1 1/8-inch
Airbrake system drained (page 2-1034).
Left cab door opened (page 2-424).
Materials/Parts
Detergent, liquid, GP (item 7, appendix C)
Lockwasher, clamp screw (three required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Safety goggles must be worn when working under truck to prevent eye injury.
1.
Cab floor through-
Line nut (2)
Using 3/4-inch open-end wrench,
connector 45-degree
unscrew
elbow (1)
and take off.
2.
Double check valve (5)
Line nut (4) and
Using 3/4-inch open-end wrench,
90-degree elbow (3)
unscrew
and take off.
TA702159
Change 1 2-1109
