TM 5-3805-264-13&P
0024
REMOVAL
NOTE
Wires should be tagged before disconnecting (WP 0072).
1.
Remove four screws (Figure 1, Item 7), washers (Figure 1, Item 8), and MCS control unit (Figure 1, Item 3)
from shift tower (Figure 1, Item 1).
2.
Disconnect indicator light connector (Figure 1, Item 5) from wiring harness connector (Figure 1, Item 6).
3.
Disconnect four wiring harness leads (Figure 1, Item 4) from toggle switches (Figure 1, Item 2). Remove
MCS control unit (Figure 1, Item 3).
Figure 1. MCS Control Unit Removal.
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M1000826413)
