TM 5-3805-264-13&P
0051
DISASSEMBLY - Continued
12.
Remove preformed packing (Figure 3, Item 5) from bottom end plate (Figure 3, Item 6). Discard preformed
packing.
13.
Remove cylinder sleeve (Figure 3, Item 7) from piston (Figure 3, Item 9).
14.
Remove nut (Figure 3, Item 10) from piston shaft (Figure 3, Item 4).
15.
Remove piston (Figure 3, Item 9) and metal washer (Figure 3, Item 2) halves from piston shaft
(Figure 3, Item 4).
NOTE
Note direction of gaskets during removal to aid in installation.
16.
Remove two plain seals (Figure 3, Item 1) and metal strip (Figure 3, Item 8) from piston (Figure 3, Item 9).
Discard plain seals and metal strip.
17.
Remove preformed packing (Figure 3, Item 3) from piston shaft (Figure 3, Item 4). Discard preformed
packing.
Figure 3. Cylinder Piston.
END OF TASK
CLEANING AND INSPECTION
Clean and inspect components in accordance with General Maintenance Instructions (WP 0072).
END OF TASK
03/15/2011Rel(1.10)root(maintwp)wpno(M1002426413)
