TM 5-3805-264-14&P
5-1.
DUMP BODY AND STABILIZER REPLACEMENT (Con’t).
2.
Working from underside of vehicle, secure
lower half (6) of stabilizer to upper half (5) and
to dump body (4) using a suitable chain or
nylon strap.
Use extreme caution when han-
dling heavy parts. Keep clear of
heavy parts supported only by
lifting device. Failure to follow
this warning may cause death
or injury to personnel or dam-
age to equipment.
NEVER work under a raised
dump body unless it is secured
in the raised position with body
props
and
dump
body
is
EMPTY. Failure to follow this
warning may result in death or
injury to personnel.
3.
Raise front of dump body (4) and support on
body props (paragraph 2-15) using a suitable
lifting device and chains.
4.
5.
Remove six locknuts (10) and screws (12) from
left and right mounting brackets (11). Remove
brackets from hydraulic cylinder pivots (14).
Discard locknuts.
Disengage PTO (TM 9-2320-363-10). Lower
hydraulic cylinder (9) by placing hydraulic con-
trol lever in cab in DOWN position (paragraph
2-1). With hydraulic cylinder lowered, place
wooden blocks between base of cylinder and
cylinder support frame (13) to provide support.
5-2
