TM 5-3805-264-14&P
5-1.
DUMP BODY AND STABILIZER REPLACEMENT (Con’t).
12.
13.
14.
15.
16.
Install left and right mounting brackets (11) on
cylinder pivots (14).
NOTE
It may be necessary to raise and/or
lower front of dump body to aline
mounting brackets to dump body.
Aline mounting brackets (1 1) with mounting
surface of dump body (4).
Install six screws (12) and new locknuts (10) to
secure mounting brackets (11) to dump body
(4). Torque locknuts to 150 lb.-ft. (203 N•m).
Remove dump body (4) from body props and
lower body (paragraph 2-15).
Remove lifting device and chains from dump
body (4).
FOLLOW-ON TASKS:
Connect chassis-to-dump body air lines (paragraph 4-59).
Connect chassis-to-dump body electrical harnesses (paragraphs 4-44 thru 4-47).
Install mud flaps (paragraph 4-63).
5-6
