TM 5-3805-264-14&P
5-7.
HYDRAULIC CYLINDER REPAIR (Con’t).
4.
Remove spiral retaining ring (7) from sleeve
(3). Discard spiral retaining ring.
5.
Using overhead lifting device with nylon sling,
raise plunger (1) a few inches and apply tape
to a cleaned section of plunger.
6.
Lower and lift plunger (1) to expose bottom
guide ring (8). Remove tape.
7.
Lower plunger (1) and remove nylon sling.
Remove bottom guide ring (8) from plunger.
Discard bottom guide ring.
5-25
