TM 5-3805-264-14&P
5-7.
HYDRAULIC CYLINDER REPAIR (Con?).
16.
Using two small screwdrivers, remove bottom
retaining ring (20) from groove of sleeve (14).
Position four hydraulic cylinder disassembly
tools, equally spaced, between bottom retain-
ing ring and sleeve.
NOTE
17.
Hydraulic cylinder disassembly
tools will fall free as sleeve, with
bottom retaining ring, is removed
from larger sleeve.
Remove sleeve (3) from sleeve (14). Remove
bottom retaining ring (20) from sleeve (3).
18.
Remove wear ring (21), piston ring (22), and two piston rings (23) from other end of sleeve (3). Discard
wear ring.
NOTE
19.
Perform steps 19 thru 26 to remove
next sleeve.
Remove retaining ring (24) from barrel (25).
5-28
