TM 5-3805-264-14&P
5-7.
HYDRAULIC CYLINDER REPAIR (Con’t).
8.
Using two small screwdrivers, remove bottom
retaining ring (9) from groove of sleeve (3).
Position four hydraulic cylinder disassembly
tools, equally spaced, between bottom retain-
ing ring and sleeve.
NOTE
Hydraulic cylinder disassembly
tools will fall free as plunger, with
bottom retaining ring, is removed
from sleeve.
9.
Remove plunger (1) from sleeve (3). Remove
nylon sling and bottom retaining ring (9) from
plunger.
10.
Remove wear ring (10), piston ring (11), and two piston rings (12) from other end of plunger (1). Discard
wear ring.
NOTE
Perform steps 11 thru 18 to remove
next sleeve.
11.
Remove retaining ring (13) from sleeve (14).
5-26
