TM 5-3805-264-13&P
0061
REMOVAL - Continued
13.
Place hydraulic control lever in DOWN position (WP 0005).
14.
Tag hydraulic control cable (Figure 5, Item 3).
15.
Remove two nuts (Figure 5, Item 5), washers (Figure 5, Item 4), screws (Figure 5, Item 8), clamp
(Figure 5, Item 6), and spacer (Figure 5, Item 7) from bracket (Figure 5, Item 10).
16.
Remove retaining pin (Figure 5, Item 2) from pivot pin (Figure 5, Item 1) and pivot pin from bracket
(Figure 5, Item 9).
Figure 5. Hydraulic Control Cable and Components Removal.
03/15/2011Rel(1.10)root(maintwp)wpno(M1003826413)
