TM 5-3805-264-13&P
0061
INSTALLATION - Continued
4.
With hydraulic control lever in DOWN position, install hydraulic control cable pivot pin (Figure 10, Item 1) in
bracket (Figure 10, Item 9) and secure with retaining pin (Figure 10, Item 2).
5.
Install spacer (Figure 10, Item 7), cable (Figure 10, Item 3), clamp (Figure 10, Item 6), two screws
(Figure 10, Item 8), washers (Figure 10, Item 4), and nuts (Figure 10, Item 5) on bracket
(Figure 10, Item 10).
6.
Place hydraulic control lever in N (Neutral) position (WP 0005).
Figure 10. Hydraulic Control Cable and Components Installation.
03/15/2011Rel(1.10)root(maintwp)wpno(M1003826413)
